Top 10 Jetson Nano Case with Fan – Computer Case Fans

As an Amazon Associate I earn from qualifying purchases.

1. GeeekPi

#ad

Jetson Nano Case with Fan for NVIDIA Jetson Nano Developer Kit Small AI Powerful Computer, GeeekPi Jetson Nano Case Support Jetson Nano B01 and A02 Version

#ad
GeeekPi #ad - Easy to assemble and provides full access to your Jetson Nano. Acrylic case with cooling fan for jetson nano developer kitsupport Jetson Nano B01 and A02 Version. Metal case for jetson nano a02 Version, please refer to Asin: B07VVJNXMB. Great heat dissipation performance. Comes with assembly screwdriver and Pincette. Package includes:1x acrylic clear case with Screws & nuts;1x Cooling Fan;1x screwdriver;1xPincette. High quality acrylic case with fan secures your Jetson Nano.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad

2. iUniker

#ad

IUniker Jetson Nano B01 Case with PWM Large Cooling Fan Jetson Nano Case Cooling Fan Compatible with Both B01 and A02 Version with Pwm Fan for B01 & A02, 2020 Latest Jetson Nano Case

#ad
iUniker #ad - All design, compatible with Both B01 Version and A02 Version. Notice: jetson Nano Board is not included. Power button comes with Led light, so you can see if the board is powered on. Great heat Dissipation Performance. Powerful jetson nano pwm cooling fan, Make Sure Your Nano Works Stable and you can Adjust the speed by your own.
BrandiUniker #ad
ManufactureriUniker #ad
Height1.97 Inches
Length7.09 Inches
Width2.36 Inches
Part NumberIU-RP-077
ModelIU-RP-077

3. GeeekPi

#ad

GeeekPi DeskPi Nano CaseOnly Support Jetson Nano B01 Version,Jetson Nano Case with Fan for NVIDIA Jetson Nano Developer Kit Small AI Powerful Computer

#ad
GeeekPi #ad - Peripheral interface leads out-GPIO and Camera and Micro SD card interface lead out, easy to use. Package includes 1x DeskPi Nano Case.

Ultra thin nuc style aluminum alloy case-The aluminum alloy case provides better protection, while the front and rear acrylic panels ensure good Wi-Fi signal. Ultimate passive and active Cooling System-Built in Ultra thin Cooler with PWM fan, Hestsinks. Compatible with jetson nano 4g and 2g versionOnly support Jetson Nano B01 Version. Power, reset and force recovery buttons lead out-Power, force recovery, Reset, these buttons are connected to the motherboard with a connector, say goodbye to longer messy cables.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad

4. Bicool

#ad

Compatible with Waveshare IMX219 Series Camera, Cooling Fan Fan-4010-5V, Jetson Nano Metal Case/Enclosure for Jetson Nano 2GB Developer Kit with Reset and Power Buttons,Camera Holder

#ad
Bicool #ad - Special camera holder-with camera mounting holes, up to 180° roll angle. Enabling the 4g communication-allows installing 4G Module Inside. Recommendation: sim7600G-H 4G for Jetson Nano. Precise opening design-Cut-outs for GPIO header, TF card, and peripheral ports. Invisible cooling fan-Heat dissipation through the airflow vent on the top, more elegant design. Jetson nano metal case-specialized for jetson Nano 2GB Developer Kit, Mini PC Chassis Design, Solid Metal Body.
BrandBicool #ad
ManufacturerBicool #ad
Part NumberJetson Nano Metal Case (E)
ModelJetson Nano Metal Case (E)

5. GeeekPi

#ad

DeskPi Nano with Cooling Fan Heatsink & AC8265 Wireless NIC Module & 32GB Card & 4K HDMI Cable for NVIDIA Jetson Nano B01 Version Developer Kit Small AI Powerful Computer, GeeekPi Jetson Nano Case

#ad
GeeekPi #ad - Power, these buttons are connected to the motherboard with a connector, Force recovery, Reset, reset and Force Recovery buttons lead out-Power, say goodbye to longer messy cables. Package includes: 1x deskpi nano case, 1x 5v 4a power supply, 1x 4K HDMI Cable, 1x 32GB SD Card with Adapter, 1x Jetson Nano Wifi Module.

High speed 4k hdmi cable - a male to male hdmi cable supports 4K resolution, High speed transmission, Crisp and stable image quality with no screen flicker, enjoy reliable performance and superior playback. Ac8265 wireless nic module with 5db antennas for jetson nano-chip: intel 8265ac; bands: 2. 4ghz / 5ghz; speed: 300mbps / 867mbps;WiFi protocol: 802. 11ac; bluetooth version: 4. 2. Ultimate passive and active Cooling System-Built in Ultra thin Cooler with PWM fan, Hestsinks.

Peripheral interface leads out-GPIO and Camera and Micro SD card interface lead out, easy to use. Ultra thin nuc style aluminum alloy case-The aluminum alloy case provides better protection, while the front and rear acrylic panels ensure good Wi-Fi signal. Compatible with jetson nano 4g and 2g versiononly support jetson nano b01 version. 32gb class 10 micro sd card-shipped with a Micro SD to SD Adapter and clear protective case.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad

6. Yahboom

#ad

Metal Case with Cooling Fan Reasonable Design, Yahboom Jetson Nano Case Xavier NX Aluminum Alloy Case Compatible with Both 2GB 4GB B01 A02

#ad
Yahboom #ad - Note: please check the installation video on this page for installation instructions; the antenna network card, camera and Jetson Nano are not included in the package. Nano case supports installation of different versions of antenna network cards: Jetson nano 2GB can be equipped with USB network card antenna, Jetson nano 4GB or Xavier NX can be equipped with M.

2 network card antenna(antenna network card NOT included). Metal case compatible with 3 motherboards: yahboom's aluminum case is specially designed for Jetson nano 2GB 4GB and Xavier NX. Jetson xavier nx case support to install 2 cameras:the case supports the installation of a single or two cameras, adjusting the buttons, and the camera can also be rotated by 180°.

Easily master shooting from different angles. One case can be used on multiple motherboards. Protect your jetbot Nano without affecting its use. Outstanding quality:the shell is made of anodized aluminum alloy, which is sturdy and anti-falling; the holes are precisely positioned, and cooling vents are reserved.
BrandYahboom #ad
ManufacturerYahboom #ad
Part NumberJetson-case

7. Yahboom

#ad

Yahboom Acrylic Case for NVIDIA Jetson Nano Compatible with 4GB B01 & A02 & 2GB with Cooling Fan and Camera Case

#ad
Yahboom #ad - Support wireless network card antenna installation, the camera bracket and cooling fan with anti-reverse connection. Jetson nano board acrylic case Protect your Jetson nano motherboard from damage. There is no installation manual in the package. The package does not contain jetson nano, camera, network cable Note: Installation video is on this page, the package does not contain instructions. Please refer to the installation video on this page for installation. Ordered after june 1, 2020 case compatible with Jetson Nano A02 and B01.
BrandYahboom #ad
Manufacturer1 #ad
Weight0.22 Pounds

8. GeeekPi

#ad

Power & Reset Control Switch, GeeekPi NVIDIA Jetson Nano B01 Metal Case with 4020 PWM Cooling Fan and 4010 Fan, Camera Holder for NVIDIA Jetson Nano Developer Kit Support Jetson Nano B01 and A02

#ad
GeeekPi #ad - Equippped with power switch and reset switch and camera bracket. For the dc 5v power supply, please refer to ASIN :B07YJDS71K.

It can be installed after you purchase the antenna, also provides an internal cooling fan and installation screwdriver, it is Made of sheet metal. Note: the jetson nano mainboard and the antenna, camera are not included in the package. Tt is very beautiful and strong, which can protect your jetson nano very well, and also provides a fan that supports PWM signal. This is a jetson nano case, reset button, which can provide switch button, FR mode Factory Recovery mode antenna interface mounting hole.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad
Part NumberZP-0100
ModelZP-0100

9. Makeronics

#ad

Makeronics Acrylic Case/Enclosure Clear Transparent for Jetson Nano with Camera Case for B01 and A02 | Power & Reset Control Switch | Cooling Fan | Assembly Instruction Included

#ad
Makeronics #ad - Power switch is pretty convenient, No need to pull the cable to restart or reboot your devices, just press the button to turn on and off. The newly updated case start from 2020/07/15 is compatible for Jetson Nano board B01 and A02 Version.

Dedicated cooling fan dc 5v, dimentsions 40mmx40mmx10mm, pwm cooling fan, 4Pin reverse-proof connector, Make Sure Nano Work Stable. Quick-responding technical support. Notice: jetson nano board, Wireless Card + antenna and Camera Module are not included. Power on and reset function equippped with power switch and reset switch button. More convenient to access GPIO connector and Camera Connector, TF card. Support imx219-77, imx219-160, imx219-200 camera module. Open case design easy access to the peripheral connectors. Professional support detialed instruction manual. Camera case2* camera case transparent with instruction included.
BrandMakeronics #ad
ManufacturerMakeronics #ad
Weight0.03 Pounds

10. Geekworm

#ad

Geekworm N100 Metal Case/Enclosure with Power & Reset Control Switch & Camera Holder for Jetson Nano A02/B01/2GB/4GB Jetson Xavier NX

#ad
Geekworm #ad - Note: the jetson nano board, antennas and cooling fan are all not included in the packing list. User manual, support jetson nano a02/b01/2GB/4GB version, search N100 at Geekworm WiKi page. About how to assemble this geekworm n100 case, refer to Geekworm WiKi search N100 for installation video of Jetson Nano A02/B01/2GB/Jetson Xavier NX.

Equippped with 2pcs momentary switch one for power and another for reset, suggest to use this noctua nf-a4x20 5v pwm fan, you need to buy the fan yourself, refer to ASIN: B071FNHVXN, and it's reserve the gpio hole and the installation space of the fan, and camera bracket, you can also use our 2PIN 5v cooling fan with ASIN: B07WNH6Y8Y. For the dc 5v power supply, refer to ASIN :B07413Q5Y4.

Three antenna holes are reserved to faciliate the arrangement of the external antenna and raspberry pi official camera, The diameter of the antenna hole is 7. 3mm. Also add the vesa mount hole at the case buttom for easy hanging. A metal case n100 specially designed for jetson nano developer kit rev a02 and b01 by geekworm; new update case verisom with TF card slot has been removed, also support Jetson Xavier NX.
BrandGeekworm #ad
ManufacturerGeekworm #ad
Height2.36 Inches
Length4.13 Inches
Weight0.55 Pounds
Width3.54 Inches
Part NumberTB-2019-10
ModelN100